Eleven months after the Federal Communications Commission put every foreign-produced uncrewed aircraft system and critical drone component on its Covered List, the agency is letting foreign drone makers back in one at a time. The condition is the same for each of them: build in the United States, or promise to.
A public notice from the FCC's Public Safety and Homeland Security Bureau, DA 26-1243, released Nov. 18, adds another batch of Conditional Approvals for UAS, routers and advanced robotic devices. Two days later the Commission put out a news release with this year's totals. Seventy-one companies have now been cleared. Twenty-three of them make drones or drone components, 24 make routers, 17 make advanced robotics and seven make power inverters.
The latest drone on the list is the FB3 heavy-lift UAS from FlyingBasket S.r.l. of Italy, approved Nov. 18. According to DroneXL, the FB3 carries up to 220 lb (100 kg), and FlyingBasket says US production will begin in early 2027.
How the exemption process works
The bureau's notice is the latest step in a process that began with a Dec. 22, 2025 notice adding all foreign-produced UAS and their critical components to the Covered List. That list identifies communications equipment the FCC has found poses an unacceptable national security risk. The proceedings run under WC Docket 18-89, ET Docket 21-232 and EA Docket 21-233.
A foreign manufacturer can get off the list through a Conditional Approval. The FCC says applicants submit ownership information, a cybersecurity description and an onshoring plan, and the Department of War and the Department of Homeland Security review the package. Once the Department of War grants approval, the listed equipment is exempt from the Covered List.
Besides the FB3, the notice's appendix names the Percepto Air Max, the Manna Drones Delivery 383.2 and the Exedy Ayre CX. According to DroneXL, the first four drone approvals are dated March 17. Neither DJI nor Autel appears on the list. Both companies are on the Covered List under Section 1709 of the Fiscal Year 2025 National Defense Authorization Act, which is a separate statutory path from the blanket foreign-drone listing.
The FCC says it is moving faster. Its release says the average case time has dropped from 40 days to 24 over the last three months, and that approvals now take less than four weeks on average.
No end date for drones, about 18 months for routers
Drone and router approvals now last for very different lengths of time.
An update on July 21, 2026 said UAS Conditional Approvals would not end on Dec. 31, 2026, as long as the applicant follows its onshoring plan and completes updated vetting. The same update extended the exemptions for the Blue UAS Cleared List and for domestic end products to Jan. 1, 2028.
The two router approvals in the Nov. 18 notice end in mid-May 2028 (May 15 for EnGenius, May 16 for Zyxel). DroneXL calculates that router approvals run out within about 18 months, while drone approvals have no fixed end date.
Drone approvals can still be taken away. The notice says an approval holder that fails to follow its onshoring plan, or that made a false statement in its application, can have its equipment put back on the Covered List. For a drone maker that has rebuilt its US sales around an exemption, that is a lasting compliance obligation.
The investment numbers don't line up
The FCC presents the Covered List as both a security measure and a source of jobs. Its Nov. 20 release says the 71 cleared companies have together promised $4.4 billion in investment and 4,700 additional jobs across all four sectors. It also says Covered List actions overall have created about 9,100 new jobs.
For drones alone, the numbers are harder to follow. The FCC release says $6 billion has been invested in US drone manufacturing since December, with 5,700 jobs, but according to DroneXL it names no company or project behind the figure. DroneXL also notes that the figure has grown over time. A July fact sheet said more than $4 billion, and an October figure put it at $5 billion to $6 billion.
As published, the $6 billion drone figure is larger than the $4.4 billion promised by all 71 approved companies combined, across drones, routers, robotics and inverters. The two figures measure different things, and the FCC has not explained how they relate. Without a list of companies, outside readers cannot check the drone total.
Chairman Brendan Carr called the Covered List "an essential tool in our national security toolkit" and said it has generated a surge in investment in American manufacturing. The release also cites more than 400 ex parte meetings, and more than 300 briefings with state, local, tribal and territorial stakeholders on router additions alone.
The industrial-policy objection
Not every commissioner agrees with that description. According to DroneXL, Democratic Commissioner Anna Gomez has said the Covered List is being used as industrial policy. Her point is that a tool built to keep insecure equipment out of US networks is now being used to win concessions unrelated to security.
The approval process gives her argument some support. Each approval reviews ownership and cybersecurity, but the condition that keeps a drone approval in force is the onshoring plan. Under the July update, a drone maker that keeps its manufacturing promises keeps its approval with no end date. One that misses them can be listed again.
Congress has also started paying attention. DroneXL reports that House Energy and Commerce Committee Chair Brett Guthrie and ranking member Frank Pallone introduced the Communications and Technology Transparency Act, which would give Congress more oversight of Covered List additions and removals, on Sept. 23.
Why It Matters
For US operators, the practical result is a growing but limited list of foreign drones they can still buy. Heavy-lift, delivery and agricultural spraying platforms are among the approved types, but the market's largest supplier, DJI, is not, and its status is set by statute rather than by this exemption process. Agencies, utilities and service providers planning fleet purchases now have to check each specific product against the Covered List and its exemptions, not just the maker.
For manufacturers, the message is simple: commit to building in the US and you can stay in the market indefinitely. The fact that approvals depend on ongoing compliance gives Washington continuing leverage over these companies, and the FCC's release does not say how it will check whether factory promises are kept. Until the Commission publishes figures that can be traced to individual companies, its investment claims, including the $6 billion drone number, should be treated as unverified rather than as audited results.
Sources
- Public Safety and Homeland Security Bureau Announces Conditional Approval and Exemption of Certain Uncrewed Aircraft Systems, Routers, and Advanced Robotic Devices From FCC Covered List, DA 26-1243 (Nov. 18, 2026)
- FCC Announces Latest Conditional Approvals for Covered List Equipment (FCC news release, Nov. 20, 2026)
- FCC Exempts 23 Drone Makers From Its Ban for US Factory Pledges (DroneXL)