Acutronic is a Swiss company that builds small jet engines for drones and missiles, and it is moving more of that work to Texas. In an interview with the Financial Times published Nov. 17, as reported by DroneXL, the company said it plans to double its US workforce over the next three years. It also plans to raise output from hundreds of engines a year to thousands next year. CEO Florian Aigrain told the paper he is not sure he would start a jet-engine business in Switzerland if he were starting today.

The interview includes one number that Acutronic itself has not confirmed. The FT says $100 million is behind the expansion and names InterAlpen Partners and Hale Capital as the backers. The company's own newsroom, according to DroneXL, lists only one funding announcement: a $25 million first close announced on April 13. That leaves about $75 million in reported funding that has not appeared in any company announcement so far.

What Acutronic Says It Will Do

Acutronic has roughly 400 employees, and about half of them already work in the US, DroneXL reports. If the US headcount doubles over three years, the American side of the company would grow to roughly the size of the whole company today. Production would also change sharply. Going from hundreds of engines a year to thousands is a jump of roughly an order of magnitude, and the company says it wants to make that jump next year.

Aigrain explained the plan in terms of supply. "Jet engines are a bottleneck across the allied world," he told the FT. The US is not the only place Acutronic is looking. DroneXL reports that the company is also considering engine production in Europe, where it already has sites in Germany and France.

The Texas Plant Has Been Planned Since 2024

The Bastrop factory is not a new idea. In June 2024, Opportunity Austin announced that Acutronic had acquired 13.84 acres in Bastrop. It plans to build what the announcement called the only jet engine manufacturing facility in Texas. That announcement promised at least 50 new jobs and an investment of upwards of $4 million in construction. The company's renovated Austin Aerospace Components Division headquarters was expected to host close to 100 employees.

Less than three months later, Acutronic inaugurated its new Austin headquarters. Swiss ambassador-designate Ralf Heckner and Austin Mayor Kirk Watson attended, according to Swiss Impact USA. Aigrain described the site as the first jet engine manufacturing site in Texas and one of the few micro-turbine plants in the US. The report repeated the figures of $4 million and up to 50 jobs.

The April 2026 funding was meant to pay for the next phase. The Austin Business Journal reported the deal, and InterAlpen republished that report. It said InterAlpen Partners of Nebraska and Hale Capital Partners of New York had invested $25 million. This was the first outside investment in the company's history. Until then, Acutronic had been self-funded with tens of millions of dollars, executives said. The new capital was to be used for product development, working capital and added production capacity. Acutronic USA said it planned to break ground on the Bastrop factory by the end of 2026, and the report said the plant would start at 20,000 square feet.

Advertisement

The $100 Million Question

As of the FT interview, only $25 million of the funding can be checked against a company announcement. A first close normally means more money follows in the same round, so the FT's $100 million figure may describe the full round as planned, though that is an inference and not something either source states. Neither DroneXL nor the company's public statements explain the gap, and the FT's report does not say how the $100 million breaks down. Until Acutronic or its investors publish a larger figure, $100 million should be treated as the FT's number, not the company's.

The difference matters for the goals the company has set. The 2024 plan for the Bastrop factory called for upwards of $4 million in construction and at least 50 jobs. Producing thousands of turbines a year and doubling a US workforce of about 200 people is a much bigger undertaking, and the plan has grown since then. Whether the money reported by the FT is what makes that growth possible is not something the sources say.

Advertisement

Why Not Switzerland

Aigrain's comment about Switzerland is the most revealing part of the interview. He cited high costs and political limits, and the FT reports that neutrality-linked export controls and banking restrictions make it harder for Swiss defense companies to export and move money. He also said Switzerland remains an important base for Acutronic because of its skilled and stable workforce.

Acutronic is not the only Swiss-founded drone company to move abroad. DroneXL points out that Auterion, which started in Zurich, moved its headquarters to the United States, and that Destinus was based in the Netherlands by the time it agreed to buy Zurich's Daedalean. Taken together, that suggests a pattern of Swiss-founded defense firms building their businesses elsewhere.

Why It Matters

Aigrain's "bottleneck" remark points at a real constraint. Many companies can build airframes, flight controllers and warheads, but a supplier that already makes small jet engines at some volume is harder to find. Acutronic says its Austin facility is one of the only ones in the United States able to mass-produce small jet engines, and DroneXL reports that it has been selected to supply engines for a number of platforms in US defense programs, which it has not named.

The pressure on prices is visible in the wider market. DroneXL notes that Russia's Geran-4 runs on a Chinese turbojet that costs about $25,000. Any Western maker trying to field cheap jet-powered drones in volume will be judged against that kind of price. More US-based engine capacity would add to a part of the supply chain that Aigrain himself describes as a bottleneck, though the sources do not say what Acutronic's engines cost.

Some important points remain open. The company has not said whether it will break ground in Bastrop before the end of 2026 as it said in April, or whether the remaining money behind the FT's $100 million figure will be announced. It also has not said whether the European production it is weighing would compete with the Texas expansion for investment or add to it. The jump from hundreds to thousands of engines next year will show whether Acutronic can deliver at the scale it is promising.

Sources